Pre-Listing Checklist: What to Fix, Who to Call, and in What Order
·8 min read·By Sawyer Stanley
Most listings that slip do not slip because of one big problem. They slip because the painter could not start until the handyman finished, the cleaner was booked before the painter, and the photographer had to be rescheduled twice. Pre-listing prep is a sequencing problem. Get the order right and three weeks is plenty. Get it wrong and you are re-shooting photos the day before you go live.
Here is the order of operations I use, who to call at each step, and what each step typically costs in California.
1. Walk the House and Write the List (Day 1)
Walk every room with the seller and write down everything a buyer or inspector will notice: stains, cracks, sticking doors, dead bulbs, worn paint, overgrown landscaping. Note the room for each item. A list organized by room is easy to sell to the seller; a list organized by trade is what vendors need. You want both.
If the house is older or you suspect bigger issues, this is also when you order a pre-listing inspection.
2. Repairs First (Week 1)
Anything structural, electrical, plumbing or roof-related goes first, because it can uncover more work and some of it needs permits. Typical calls:
- Handyman for small items (in California, unlicensed handymen can only take jobs under $1,000 in labor and materials combined).
- Licensed trades for electrical, plumbing, roofing and anything that needs a permit.
- A general contractor when three or more trades are involved. One GC managing the subs is almost always faster than you managing five vendors.
3. Paint and Flooring (Week 1–2)
Paint comes after repairs because repairs make dust and patch marks. Interior paint on a typical Bay Area home runs roughly $4,000–$12,000 depending on size and how much is painted. Flooring refinishing or replacement comes after paint so painters are not working over new floors.
4. Exterior and Landscaping (Week 2)
Pressure washing, exterior touch-up, fresh mulch, trimmed hedges and a clean entry. Curb appeal is the first photo, so it has to be done before the photographer is booked.
5. Deep Clean (Week 2–3)
A move-out-level clean after all trades are done, including windows inside and out. Book it for the day after the last trade leaves, not before. Typical cost: $400–$1,200.
6. Staging (Week 3)
Stagers book up, so reserve the date at the start even though they come near the end. Full vacant staging for a Bay Area home commonly runs a few thousand dollars for the first month; partial staging for an occupied home costs less.
7. Photos, Video and Floor Plans (Week 3)
The last step. Book the photographer for the day after staging, ideally at the time of day the house gets its best light. Confirm the seller knows the house needs to stay photo-ready from that day until you go live.
Who to Book on Day 1
Even though they come at different points, book these on day one so dates are held:
- Stager (books up fastest)
- Photographer and videographer
- Painter
- Cleaner
- Your handyman or general contractor
Keeping the Timeline from Slipping
Every handoff is a place the schedule breaks: a vendor runs a day late and everything after them moves. Confirm each vendor the day before, and build one buffer day before photos.
This is exactly the work the WorkOrder Assistant was built to take off your plate. Text Jamie the listing and the list, and it builds the timeline, reaches out to your preferred vendors first, finds licensed local pros when you do not have one, and keeps every appointment on the listing calendar.
The Bottom Line
Repairs, then paint, then exterior, then clean, then stage, then shoot. Book everyone on day one, confirm every vendor the day before, and leave one buffer day before photos. That is most of the difference between a listing that goes live on time and one that does not.
Frequently Asked Questions
How long does pre-listing prep take?
Two to four weeks is typical for a house that needs paint, minor repairs, cleaning and staging. Simple cosmetic prep can be done in about a week; anything that needs permits or specialty trades can take longer, which is why repairs go first.
What order should pre-listing work happen in?
Inspections and repairs first, then paint and flooring, then landscaping and exterior touch-ups, then a deep clean, then staging, then photos and video. Each step depends on the one before it, so booking out of order is the most common reason listings slip.
Should sellers fix everything before listing?
No. Fix what buyers and their inspectors will flag as defects, and the cosmetic items with the best return (paint, lighting, curb appeal). Larger items are often better disclosed with a contractor bid attached so buyers can price them.
About the author
Founder of WorkOrder and a growth advisor to real estate and construction companies across California, with more than a decade in both industries as a general contractor and real estate investment specialist.